How To Fix A Dent In Drywall

Allow the patch to dry and check for shrink back.

Fill the dent with either quick setting drywall compound or spackle and scrape it level with the surface of the drywall. Fix a larger dent in the wall. Run strips of self adhesive fiberglass drywall tape around the patch centering the tape on the seams. Once the hole is full scrape off the excess compound with the joint knife and wait for the compound to completely dry.

Cut a piece of store bought drywall to fit inside. Use a 6 inch drywall taping knife to spread drywall joint compound across the patch and tape to create a smooth flat surface. Scoop out a small portion of drywall compound with a 6 inch putty knife and apply a thin coat of compound. Repeat with a second coat.

After the joint compound has dried apply additional coats until the defect is filled. Dents in drywall are very common and pretty easy to repair as follows. Screw the board to the drywall with drywall screws. Fill in the dented area.

RELATED ARTICLE :

• how to export after effects to mp4
• how to figure out a rubix cube
• how to factory reset galaxy note 5

You ll need a putty knife putty or drywall compound primer 120 grit sandpaper or a sanding sponge the color paint of the rest of the wall and the same kind of brush used to paint it originally. If the drywall mud has shrunk add a second coat again scrapping it level with the surrounding drywall. How do i fix so it looks like it never happened. Remove any loose paint and drywall bits and clean the dent and the area around with a mild soap and water mixture.

Clean the affected area. That s how you fix a dent in the wall. Hold the knife at a 45 degree angle to the wall scrape off the. To fix a nail hole in drywall start by scraping off any loose edges around the hole so the edges of the hole are flush with the wall.

I punched a dent in the wall. To repair dents small cracks and other minor defects in drywall apply joint compound to the wall using a drywall knife or wide putty knife. Use a 4 to 6 inch flat blade taping knife the cheap disposable plastic type is okay to apply spackle or premixed drywall joint compound to the dented area. Cut around the damaged area in a square.

Apply a drywall compound or putty to fill in the gaps between the drywall and actual wall.