How To Fix A Broken Cabinet Frame

If the damage is minor and on a part that is not too exposed you can just re assemble the broken pieces and hold them together with wood glue.

For more severe damage one can replace the large piece of wood that is broken with a newly cut piece of the same wood species. A broken cabinet frame or damaged cabinet wood probably requires the most work. Start by removing the hinge screws on the cabinet and flipping the hinge out of your way. The users can easily fix up this problem by using the toothpicks and glue.

Then gently take the corner the rest of the way apart and sand away any remaining old glue. Mix an epoxy filler used for furniture repair. Place a scrap piece of wood with wax paper over it under the repair and turn the door face up. In lieu of this option he improvised and repaired the broken stile.

Repair a cabinet side split near the hinge mounts. The best fix starts with removing any nails from the corners. Some wood glue or epoxy can repair the split and a drill can be used to reestablish the holes for a fir. Tap the ends of them all deeper into the hole.

RELATED ARTICLE :

• how to fix a leaky bathroom faucet
• how to fix a glass top stove
• how to fix asymmetrical face without surgery

Apply wood glue reassemble the corner and. With a razor knife or sharp wood chisel cut the toothpicks flush with the edge of the face frame. Drill out the stripped screw hole to accept the plug. Press the filler into the gap from the back side of the door.

Add as many as will fit into the hole. A broken cabinet frame or damaged cabinet wood probably requires the most work. He glued the joint and then clamped it by using shims above and below the panel. If the accident pulled out a large chunk of the particleboard glue it back into place and let the glue set up before proceeding with the rest of the repair.

Once the glue dried hilgenberg filled the imperfections with bondo. This will knead into a dough like consistency. For more severe damage one can replace the large piece of wood that is broken with a newly cut piece of the same wood species. This keeps the filler from pressing back through.

Let dry then sand the face frame to make the surface scratchy. 2 prime the face frame with latex primer. If the cabinets are melamine or covered in oil paint use oil or alcohol primer. Smooth it out with a putty knife.