How To Frame A Mirror With Clips

The first step is to measure your vanity mirror length and width.

Carefully align the mirror to the back and press it into place. Put a thin bead of silicone around the edge of the mirror or inside lip of the frame. Using a utility knife carefully make slices into the wood between the marks. At this point you can use a small chisel to make a small recess into the wood.

This step is easiest with 2 people. These can be made with wood and the idea is that they screw into the frame while over hanging the mirror area. Keep going until your whole frame is put together. Attach the mirror to the back of the frame using silicone.

You are stapling the back of your frame. Cut 2 inch lengths of 1 inch wide double sided heavy duty mounting tape. Follow the directions and warnings from your particular brand. Two per side should do it.

RELATED ARTICLE :

• how to deter cats from your yard
• how to delete a facebook business account
• how to detox your body from drugs

Using your miter saw cut your wood at a 45 degree angle so the outside portion of your wood piece will be the full length of the mirror see pic above. Place the piece of wood against the mirror and mark the location of the clips with a pen or pencil. When you find which one fits best unscrew the screw holding the plastic clip and then replace it with the washer using the same screw and hole already in your wall. While i used scrap from this project you can use any wood you like as this will never be seen.

Make cuts for all four sides. I originally hadn t planned on going the staple route at all. To hold the mirror and back panel in place we ll need some low profile clips. Take the casing and cut the top bottom and sides to those lengths on the outside edge with 45 degree miters on both ends using your miter saw this should leave a 1 inch overhang when installed on the mirror.

Paint decoart americana decor satin enamels in pure white and here s how to frame a mirror with clips. Cut the frame casing measure the mirror and add 2 inches to the length and width. Remember to wear a mask and eye protection while sanding and working with wood and wear an appropriate mask while working with stains and finishes.