How To Fix Heating Element In Dryer

Turn it upside down.

All you have to do to replace the heating element is first unplug your dryer from the wall outlet remove the back panel which consists of a series of 1 4 or 5 16 hex head screws. On an electric dryer the thermal fuse will be on the housing for the blower or on the housing for the heating element or both. If you have a voltmeter test the element. If the element is defective then it will not heat.

You ll see one screw holding the element in. You can find the heating element in the back of the dryer flush with the right side of the appliance. The heating elements are located inside the heater ducts. Take a screwdriver and remove all of the screws lining the side of the coil panel which looks like a metal box.

Electric current flowing through the coil creates heat and the air being pulled through the chamber absorbs this heat. Remove the 2 screws attaching the heating element to the dryer before sliding the panel out. Your dryer may have more than one. Remove the back service panel to gain access to the elements.

RELATED ARTICLE :

• how to even out your skin tone
• how to end period in 2 days
• how to export premiere pro to mp4

The element is a coil of heating wire enclosed in a metal chamber. Also test the sensors. If you think a heating element. It can be tested with a multi meter for continuity.

Check outside where hot air is vented and be sure it is clean and free from blockage. Examine the coil for breaks. Some heating elements may require you to remove the existing thermostat from the old. Electric heating elements found in electric dryers are self contained units located in the back of the dryer.

A defective heating element is frequently the source of no heat or drying problems. Whirlpool dryer heating element fix. Use a canister vacuum or lint cleaning tool to remove all lint from the back of dryer the lint screen all lint in the vent line and in the wall. Unplug the dryer and find the thermal fuse usually inside a housing made of white plastic and about an inch long or a bit longer.

Once you have the part unplug the dryer remove the back panel remove the connections and install the new one. This will tell you what s broken. A blocked or clogged air vent line will cause a dryer to stop heating. This is a very easy repair.