How To Fix A Leaky Moen Faucet

Get access to the full video library at.

Faucet is leaking under the sink when a swivel faucet is leaking from the base some of the water may drip underneath the sink. A step by step tutorial showing you how to fix a leaking moen bathroom faucet. If you have a two handle kitchen faucet you will need to replace the faucets o rings. Turn off the water valves under the sink and open the faucet to relieve water pressure.

Replace the 2 o rings on the copper base of your faucet and lube them up. The problem could be a damaged cartridge or worn seals. You ll need an allen wrench crescent wrench channel lock pliers replacement o rings plumber s grease new o rings and a new cartridge. Turn the faucet on to empty any water in the pipes and plug the drain so nothing falls down it while you re working.

Follow this step by step process to repair a leaking moen kitchen faucet. With moen you ger guarantee on all part of the faucet and moen will replace defected part any time. Frequently asked questions how do i determine which parts i need. To fix a leaky faucet first turn off the water to your faucet by twisting the valve under the sink.

RELATED ARTICLE :

• how to draw an anime boy body
• how to draw gir from invader zim
• how to draw deadpool step by step

If there s no valve turn off the water supply for your whole house. You will be able to. Watch to see how he takes the faucet apart and puts it back together. This nut doesn t need to be super tight.

Now simply insert your new moen replacement sink cartridge into the faucet. Read also best selling faucet for bathroom steps to repair a leaking moen kitchen faucet. Moen recommends lubricating them with silicone based grease not ordinary plumber s grease to make them watertight and easier to install. Refasten the brass nut that secures the cartridge in place by hand tightening it then using channel locks.

To access the cartridge some disassembly is required. You fix this by replacing the o rings. If you have a faucet with a pullout wand confirm that the spray wand and pullout hose connection is tight. Slide your spout back over the copper base 3.